Makita DTR180 18v Brushless Rebar Tying Tool (All Versions)

The Makita DTR180 18v rebar tying tool is fitted with a brushless motor for maximum run times and enables the fast and efficient application of rebar tie wire, reducing the need for GC07 Hot-work permits and reliance on manual labour. It delivers double loop ties at the press of a button and is ideal for time-consuming construction tasks like laying concrete foundations over a wide area. It can be used one-handed in either single or continuous mode, leaving the other hand free to adjust the position of the rebar. The tool is suitable for use with D10, D13 and D16 rebar in varying combinations of 2, 3 and 4 pieces

In continuous mode the operator can make multiple ties simply by pushing the contact arm against the workpieces while holding the trigger down. According to the condition of the tying material, the tying strength can be adjusted in six stages. Using a 5Ah 18v battery, up to 120 ties of 0.8mm diameter annealed wire can be accomplished.

This Makita rebar tying tool has an ergonomic design which operates with low levels of noise and vibration and its simple reel change system benefits from an onboard storage space for the included hex key.

• Voltage: 14.4 / 18 v
• Maximum Output: 340 w
• Tie Wire: 0.8 mm
• Applicable Rebars: D10 x D10 - (D13 x2) x (D13 x2)
• Approximate ties per reel: 120 (with BL1850B)
• Vibration no load: 2.5 m/sec²
• Vibration K factor: 1.5 m/sec²
• Noise sound pressure: 78 dB(A)
• Noise K factor: 3 dB(A)

• Brushless motor
• On-tool storage for hex wrench
• Ergonomically designed handle with soft grip
• Tying rebars can be done automatically for a range of applications such as building concrete foundations
• Operable by only one hand, allowing the other hand to be free to adjust the position of the rebar
• 2x operating modes: Single or continuous action
• Continuous actuation mode for efficient continuous tying: User can tie rebars by only pulling contact arm against rebars if they continuously hold the trigger
• Tie wire reel can be replaced simply by opening reel cover
• Adjustable Rebar tying strength: According to the condition of tying material, tying strength can be adjusted in 6 stages