Makita DHR241Z 18v LXT SDS+ Rotary Hammer Drill (Body Only)

The Makita DHR241Z is the brother to the DHR202 but with a back "D" shaped handle, with 2.0 Joules per blow it is capable of drilling holes in masonry up to 20mm. 3 functions include rotary hammer for masonry drilling, rotary only for wood, metal and plastic and hammer only mode for chiselling this is an excellent all round machine suitable for all trades.

The variable speed trigger has a forward/reverse lever and a lock on button for extended use and the one-touch sliding chuck allows rapid bit change over and accepts all SDS+ drill bits and chisels. Chisels can be locked off at any of 40 positions throughout 360° and an LED light brightens up the work area once the trigger is depressed.

The side handle can be fitted both left and right handed and incorporates a handy depth stop and the torque limiter protects the user in the event that the bit snags while drilling.

• Voltage: 18 v
• Max in concrete: 20 mm
• Max. in steel: 13 mm
• Max. in wood: 26 mm
• Impact energy: 2.0 J
• Blows per minute: 0-4000 bpm
• Noise sound pressure: 86 dB(A)
• Noise sound power: 97 dB(A)
• Noise K factor: 3 dB(A)
• No Load Speed: 0 - 1100 rpm
• Vibration: Drilling: 2.5 m/sec²
• Vibration K factor: 1.5 m/sec²
• Vibration: Hammer Drilling: 12.5 m/sec²
• Vibration: Chiselling: 9.5 m/sec²
• Net weight: 3.5 kg

• Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery
• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time
• Conveniently located push button for forward and reverse
• High comfort grips
• One-touch sliding chuck for easy bit changes
• Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions
• Triple operation mode: Rotary only, hammer only and rotary hammer