Makita DBN500 18v LXT Brad Nailer (All Versions)

The Makita DBN500 uses compressed air generated by piston action linked to the DC motor provides less reaction force and "air nailer like" shot feeling to the operator plus longer service life.

With a slim nose that allows for greater visibility and just 28mm edge distance between the tool end and the nail exit point this nailer is ideal close to the edge nailing and tight areas. A rubberised grip allows firm control and side bumpers prevent damage.

The magazine has a capacity of 110 pcs and the unit is compatible with 18g pins from 15 - 50mm and up to 1,000 pins can be fired from a single 3Ah battery charge. A rocker switch selects either sequential mode or bump mode, sequential mode is for single pin firing and bump mode allows rapid nailing by holding down the trigger and bumping the contact arm against the workpiece.

Other features include an LED job light that illuminates the workpiece, a "low battery" warning light and a anti dry-fire mechanism that prevents the tool being operated with an empty magazine.

• Voltage: 18 v
• Nail gauge: 18 Ga
• Nail Length: 15-50 mm
• Nail type: Finish
• Shots per battery charge: 1000
• Magazine Capacity: 110
• Noise sound pressure: 79 dB(A)
• Noise K factor: 3 dB(A)
• Maximum Output: 460 w
• Vibration K factor: 1.5 m/sec²
• Vibration no load: 2.5 m/sec²
• Net weight: 3.5 kg

• Only 28mm distance between nail exit and tangential line of front body
• Slim nose allows better visibility for easy access to the point you aim at. Enables user to shoot nails into tight spaces
• LED job light
• Anti Dry-Fire Mechanism
• Belt hook
• Ergonomic soft grip
• Rocker switch to select sequential/bump fire mode
• Tool-less depth adjustment
• Battery capacity warning lamp
• Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current
• Trigger lock